HiLite Visible Light Source

The HiLite is a compact but powerful visible red laser sources designed to troubleshoot faults on Fibre optic cables. Light generated by these units will escape from sharp bends and breaks in jacketed or bare Fibres, as well as poorly mated connectors. They can identify faults in Fibre optic jumper cables, distribution frames, patch panels, and splice trays.

MT Tracer (12-Fiber VFI & Display)

The MT Tracer is a compact multi-Fiber visual fault identifier (red laser source) supporting 8 or 12 Fiber MTP® connections. The user simply connects the 12-Fiber cable directly to the unit. Fibres can be tested individually or all at once. By progressing sequentially through the Fibres, cables can be quickly checked for polarity by verifying the proper order at the output.

The MT Tracer Display is a passive optical device designed to receive the light from the MT Tracer Source and provide an eye-safe method of viewing the red light. Identification is accomplished by expanding the output of the MT ferrule to a large easy to read panel - large enough to be read from several feet away.

Launch Leads / Tail Leads / Fiber Rings

50/125um Multimode 150m ST-ST Fiber Launch Lead

£395.00 (ex vat)

Product ID: FR1-M5-150-ST-ST 

Lightweight, rugged fibre ring with 150m of 50/125um multimode fibre and ST connectors at both ends. For use as a launch or receive lead with OTDR testing.

62.5/125um Multimode 150m ST-ST fibre launch lead

£395.00 (ex vat)

Product ID: FR1-M6-150-ST-ST

Lightweight, rugged fibre ring with 150m of 62.5/125um multimode fibre and ST connectors at both ends. For use as a launch or receive lead with OTDR testing.

Singlemode 150m FC/PC - FC/PC fibre launch lead

from £395.00 (ex vat)

Product ID: FR1-SM-1000-FC-FC

This launch/receive lead is packaged in a strong and lightweight box for daily field use. Available with 500m or 1000m lengths of standard singlemode fibre and FC/PC connectors at both ends, please call for a price on 500m and 1000m launch leads.

Noyes® Test & Inspection: Fibre Optic Inspection Microscopes

VS 300 View Safe Video Microscope for Fibre Optic Connectors on Patch Cords

The VS 300 view safe video microscope removes concerns for eye safety while inspecting optical fibre connectors. The design eliminates the optical path to the eye by utilizing a miniature camera and a state-of-the-art micro-display that achieves unparalleled clarity and resolution.

Fiber inspection scopes are used to inspect optical fibre connectors for scratches, dirt, pits, or other problems normally associated with poor transmission performance. By using threaded adapter mounts, Noyes fibre scopes can inspect the fibre and surrounding ferrule of virtually any connector style. Three models, the VFS 1, OFS 300, and VS 300 are available for various applications.

The VS300 is modelled after the functionality of our highly successful OFS300 product line with the following improvements:

OFS 300 Optical Microscope for Fibre Optic Connectors on Patch Cords

The Noyes OFS 300 from Fibreplus Ltd. is a versatile Optical Fiber Scope with precision 200X magnification. This handheld and rugged scope is used for inspection of optical fibre connectors for scratches, dirt, or other problems normally associated with poor transmission performance. A built-in laser safety filter provides > 40 dB IR protection to reduce risk of injury to the eye if accidentally viewing an active fibre.* The OFS 300 features a universal adapter cap mount that accepts a variety of Noyes thread-on style adapter caps (ordered separately) to ease inspection of many connector style. A momentary power switch located on the top panel keeps one hand free for focusing.

The OFS 300 offers 60 hours of continuous battery life from standard 2 x AA batteries and features an LED indicator, which will flash when barriers require replacement.

Optical Fiber Identifier FID-21R

FID-21R optical fibre identifiers can pick up optical traffic within a fibre through 3mm ruggedised outer jacket by simply clipping onto the fibre and without causing damage to the fibre/coating or interruption of the signal. General traffic will be detected, the direction of travel is indicated and the power level measured through the coating is displayed. If a tone is present, this will be detected for individual fibre identification. The FID-20R has the additional feature of a built-in optical power meter with interchangeable connector styles. Having a low profile head allows the FID-20/21R to be connected to fibres in restricted areas such as fibre splice trays.

Optical Fiber Identifier FID-20R with integral power meter

FID-20R optical fibre identifiers can pick up optical traffic within a fibre through 3mm ruggedised outer jacket by simply clipping onto the fibre and without causing damage to the fibre/coating or interruption of the signal. General traffic will be detected, the direction of travel is indicated and the power level measured through the coating is displayed. If a tone is present, this will be detected for individual fibre identification. The FID-20R has the additional feature of a built-in optical power meter with interchangeable connector styles. Having a low profile head allows the FID-20/21R to be connected to fibres in restricted areas such as fibre splice trays.

KABIFIX LK 25 CABLE STRIPPER

£24.99 (ex vat)

Plastic insulated cables         Ø 6 - 25 mm (1")
Cutter for plastic tubes         Ø 6 - 25 mm (1")

for Optical cables, Coaxial and Moisture-proof cables,

Cutter for plastic tubes V 6-25 mm (1”).

KABIFIX FK 28 Optical Fiber Cable Stripper

£19.99 (ex vat)

For insulated cables              Ø 6 - 28 mm (1 1/8 " )
Cutter for plastic tubes        Ø 6 - 28 mm (1 1/8 " )

Hand operated, easy to use.

Safe and fast stripping even for strong outer sheaths.

Automatic change from circular to longitudinal cut.

Hardened blade, easy to replace.

Robust body of reinforces polyamide, light weight.

Direction for use

1. Press stop pawl to retract ratchet.

2. Turn regulating screw to set height of blade according to thickness of insulation.

3. Insert cable into trough.

4. Push ratchet up until blade fully enters insulation.

5. Turn tool circularly then pull for longitudinal cut.

6. Remove insulation.

One Click Cleaner

£38.00 (ex vat)

8500-05-0001MZ

8500-05-0002MZ

With Innovative Push-to-Clean Design

The One-Click Cleaner is an easy-to-use option for cleaning connectors in adapters. Simply insert the One-Click Cleaner into an adapter and push until an audible “click” is heard. The One-Click Cleaner uses the mechanical push action to advance an optical grade cleaning tape while the cleaning tip is rotated to ensure the fibre end-face is effectively, but gently, cleaned. The One-Click Cleaner is a must-have for field technicians. Small enough to fit in a shirt pocket and a great addition to cleaning kits. Save your wrist – no more twist!